Brother DCP-1512 Driver

The Brother DCP-1512 is a member of the same printer series as the DCP-1510, MFC-1810, and MFC-1815 models. Utilizing electrophotographic laser print technology, this printer allows for efficient use of printing resources. It operates optimally on a power source of 110-120 volts and 50/60 Hz in Mexico, and 220-240 volts in Chile and Argentina.

Specifications

On average, the printer’s power consumption varies depending on the specific function it is performing, whether it is printing, copying, scanning, or any other process. For instance, printing and copying require a power output of up to 380 watts at 25⁰C, while the active mode uses roughly 40 watts at the same temperature. When the printer is in a deep sleep, it consumes about 1.3 watts of power, whereas when it is powered off, the power consumption drops to approximately 0.28 watts. These power consumption levels are critical in determining the printer’s overall energy efficiency and its impact on the environment.

In terms of physical attributes, this printer has a weight of approximately 17.6lbs or 8.0 Kg, and dimensions of 11.1 inches in height, 13.3 inches in depth, and 18 inches in width. For optimal performance, the operating temperature of the device should be within the range of 10 to 32.5⁰C, while storage temperature should be kept between 0 and 40⁰C. As for humidity, the printer can operate within a range of 20 to 80%, and the room’s humidity level should be maintained between 10 and 90% without any condensation.

The primary means of connecting to this device is through the hi-speed USB 2.0 port, which necessitates the use of an appropriate USB cable of type A/B, not exceeding 6 feet in length. Scanning is limited to one sheet at a time when using the scanner glass, with a maximum length of 300 mm and width of 215.9 mm. The weight of the scanner glass itself is approximately 4.4 lbs or 2.0 kg. To download the Brother DCP-1512 driver, visit the Brother website.