Brother HL-1110 Driver

The Brother HL-1110 printer model, just like its counterpart Brother HL-1112, utilizes the laser electrophotographic printing method. Its built-in internal memory boasts 1 MB of RAM for processing printing tasks. The device requires an alternating current power source with a voltage range of 110 to 120 Volts and a frequency of 50/60 Hz. Nevertheless, for Argentina and Chile, the voltage range should be between 220 and 240 volts AC, with the same frequency.

Specifications

The device’s power consumption is predominantly dictated by the printer’s current operating mode, with peak performance demanding up to 1044 watts. This figure is similar for Chile and Argentina, where peak performance requires around 1056 watts. Standard printing requires approximately 380 watts of power at an average temperature of 25⁰C, while the printer’s active mode consumes 40 watts of power at the same temperature.

The printer boasts physical dimensions of 7.4 inches in height, 9.4 watts in depth, and 13.4 watts in width. It weighs approximately 9.9 lbs (4.5 kg) and emits a sound pressure of 51 dB while operating at an audio power of 6.60 B.

To ensure optimal performance, users must adhere to certain requirements. These include maintaining a temperature range of 10 to 32.5⁰C during operations and 0 to 40⁰C in storage.

For optimal operations, it is recommended to maintain humidity levels between 20 and 80%, without condensation. However, for storage, the recommended range is between 10 and 90%. When it comes to interface options, the standard procedure is through the USB 2.0 full speed port. To ensure the best performance, the manufacturer suggests using a USB cable that is no longer than 2 meters and of type A/B. To download the Brother HL-1110 driver, please visit the Brother website.